user admin itadmin itadmin是超級帳戶,是唯一可以修改密碼的帳戶。 這三個帳戶的說明以及默認密碼如下表所示: 帳戶 | 描述 | 默認密碼 | user | 允許修改基本的打印機設置 | 無 | admin | 允許修改基本的打印機設置,藍牙和RFID設置 | pass | itadmin | 允許修改所有的設置 | pass | 三帳戶的權限分配,以及設置路徑與項目說明如下表: 設置路徑 | 項目 | user權限 | admin權限 | itadmin權限 | Alerts | Various alerts: status, delays,message | ● | ● | ● | Communications,Bluetooth | Bluetooth(modes,visibility,security) | | ● | ● | Communications,Ethernet | Ethernet(IPv4 IPv6) | | | ● | Communications,Serial,ComN | UART configuration | ● | ● | ● | Communications,Wireless 802.11(security,TCP) | Wireless 802.11 | | | ● | Network Services | Avalanche,DNS,SmartSystems,etc. | | | ● | Network Services,Net1,New Line Char | Net1 Newline character | ● | ● | ● | Printing,Cutter | Cutter | ● | ● | ● | Printing,Media | Media(size,type,calibration) | ● | ● | ● | Printing,Print Quality | Print quality ,speed | ● | ● | ● | Printing,RFID | RFID | ● | ● | ● | System Settings, Audio | Audio settings | ● | ● | ● | System Settings,Display | LCD display-related | ● | ● | ● | System Settings,General | General System Settings | ● | ● | ● | System Settings,Maintenance Alerts | Faulty dot, media/ribbon low, battery | ● | ● | ● | System Settings,Maintenance Alerts | User-settable odometers | ● | ● | ● | System Settings,Manage I/O | 802.11 WiFi interface enable/disable | | | ● | System Settings,Manage I/O | Bluetooth interface enable/disable | | ● | ● | System Settings,Manage I/O | RFID enable/disable | | ● | ● | System Settings,Manage I/O | Virtual Com enable/disabl | | ● | ● | System Settings,Manage Services | Web server, FTP, Avalanche,etc. | | | ● | 如何更改admin和itadmin帳戶的默認密碼呢?方法如下: 使用超級終端通過串口或網絡中的TCP 9100端口連接到Intermec打印機。 1、如果你想要更改身份驗證密碼的話,輸入這樣一條簡單的運行命令,"su -p pass itadmin" 2、為了查看你當前登錄的情況,可輸入運行這條命令,"whoami" 3、一旦你登錄到所需的帳戶,使用下面的命令就可以修改密碼。 運行"password" 輸入老密碼(pass) 輸入新密碼(smartdigital) 重新輸入新密碼(smartdigital) 4、這樣你就可以使用新密碼登錄到網頁上了。 把 Intermec打印機恢復到出廠設置時,并不會重設密碼,你只能通過上述的方法來更改密碼,如果你丟失了密碼,你將需重新安裝打印機的firmware固件才能夠把密碼恢復的原始密碼。
|